Detected Applications - There is no data to display.
-
For some reason there is an issue in that folder, that cause the structure to recurse / loop endlessly.
We are looking at approaches to avoid following such loops (in a generic way, rather than excluding that specific folder). Due to the holidays a solution is not right around the corner, but it is on the high priority list and we will address it soon.
-
For the time being I ran Secteer immediate for path C:\Program files and again with C:\Program Files (x86) to see if any software was not latest and I found two.
After Secunia PSI went away, I have been using PatchMyPC, SUMO, Heimdal Pro to see what needs updating. Unlike Secunia which used to show almost everything, these 3 give bits and pieces and that is why I was looking for a better option.
Thanks for looking into this.
Like Secteer excludes scanning Recycle Bin, similarly this directory structure of Containers needs to be excluded also.
C:\ProgramData\Microsoft\Windows
and
C:\Users\All Users\Microsoft\Windows
That's my thought.
@Tom Once again appreciate your time and patience in resolving these issues. -
C:\ProgramData\Microsoft\Windows\Containers
Directory of C:\ProgramData\Microsoft\Windows\Containers
10/02/2018 11:00 PM <DIR> .
10/02/2018 11:00 PM <DIR> ..
12/21/2018 06:47 PM <DIR> BaseImages
12/22/2018 11:54 AM <DIR> Dumps
12/21/2018 08:20 PM <DIR> Sandboxes
12/21/2018 08:20 PM <DIR> Zygotes
0 File(s) 0 bytes
6 Dir(s) 230,609,969,152 bytes freeDirectory of C:\ProgramData\Microsoft\Windows\Containers\BaseImages
12/21/2018 06:47 PM <DIR> .
12/21/2018 06:47 PM <DIR> ..
12/21/2018 06:47 PM <DIR> 81d3cadc-05e5-4680-9e82-e479c73896b6
0 File(s) 0 bytesDirectory of C:\ProgramData\Microsoft\Windows\Containers\BaseImages\81d3cadc-05e5-4680-9e82-e479c73896b6
12/21/2018 06:47 PM <DIR> .
12/21/2018 06:47 PM <DIR> ..
12/21/2018 06:46 PM <DIR> Files
12/21/2018 06:47 PM <DIR> Snapshot
12/21/2018 06:46 PM 4,194,304 SystemTemplate.vhdx
12/21/2018 06:46 PM 75,497,472 SystemTemplateBase.vhdx
2 File(s) 79,691,776 bytes
4 Dir(s) 230,609,874,944 bytes freeFile folder
C:\ProgramData\Microsoft\Windows
3.23 GB (3,469,314,133 bytes)
10,497 Files, 1,134 Folders
Read-only (Only applies to files in folder)
These were Containers Properties under C:\ProgramData\Microsoft\Windows
-
Basically it starts of with 34% memory and slowly increased around 80%, before it quit with bad allocation. The Secteer itself starts of around 2 MB or so and slowly went past 2000 MB or so.
Mostly it was c:\ProgramData\Microsoft\Windows... or \Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\ which was doing recursively inside up to 23 times in one path like below
[2018-12-21 18:10:58.180-0360] Error (a) enumerating directory 'c:\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\All Users\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files
\Users\WDAGUtilityAccount\AppData\Local\Application Data' : 0x00000005 => Access is denied. -
@Tom
As mentioned in chat
Running immediate
with "C:" gave[2018-12-21 18:05:10.392-0360] Enumerating 'c:'
[2018-12-21 18:05:10.419-0360] Recycle Bin: c:$Recycle.Bin
[2018-12-21 18:05:10.421-0360] Skipping 'c:$Recycle.Bin', since it is a Recycle Bin
[2018-12-21 18:05:10.442-0360] Error (a) enumerating directory 'c:\Documents and Settings' : 0x00000005 => Access is denied.
[2018-12-21 18:05:21.171-0360] Error (a) enumerating directory 'c:\ProgramData\Application Data' : 0x00000005 => Access is denied.
[2018-12-21 18:05:21.173-0360] Error (a) enumerating directory 'c:\ProgramData\Desktop' : 0x00000005 => Access is denied.
[2018-12-21 18:05:21.174-0360] Error (a) enumerating directory 'c:\ProgramData\Documents' : 0x00000005 => Access is denied.
[2018-12-21 18:05:21.768-0360] Error (a) enumerating directory 'c:\ProgramData\Microsoft\Diagnosis\FeedbackHub' : 0x00000005 => Access is denied.
Error (a) enumerating directory 'c:\ProgramData\Microsoft\Diagnosis\TenantStorage\P-ARIA' : 0x00000005 => Access is denied.
[2018-12-21 18:05:21.769-0360] Error (a) enumerating directory 'c:\ProgramData\Microsoft\Diagnosis\TimeTravelDebuggingStorage' : 0x00000005 => Access is denied.
[2018-12-21 18:05:21.968-0360] Error (a) enumerating directory 'c:\ProgramData\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files\Documents and Settings' : 0x00000005 => Access is denied.
[2018-12-21 18:05:22.381-0360] Error (a) enumerating directory 'c:\ProgramData\Microsoft\Windows\Containers\BaseImages\e5ee5788-c3b5-420c-9baa-16c0eee19a9e\Files\ProgramData\Application Data' : 0x00000005 => Access is denied.
[2018-12-21 18:05:22.381-0360] -
Just for the record, this answer was sent in the private chat to @KI108 :
The "Error => bad allocation" you see in the log, that is due to the agent not being able to allocate memory.
This puzzles us as it doesn't use more than 40MB on any of our test boxes, we have really done a lot to limit the memory footprint.
But, this lead us to look at another thing, it is spending around 10 minutes enumerating your filesystem, this usually takes less than a minute, depending on type of drive, system load and number of apps and AV products. Regardless, 10 minutes seems to be a very long time compared to what we normally see.
We suspect there may be a "looping path issue" or multiple symlinks to directories with a lot of files. But this is guess work.
I would appreciate is you could do two things:
-
Monitor the RAM usage in task manager while running the "secteer.exe --immediate"
-
Run
secteer.exe --immediate --path="c:\program files"
or
secteer.exe --immediate --path="c:\program files\mozilla firefox"
or something else specifc
-
-
@Tom
Sent. Thanks for looking into my issue. I appreciate your time and patience to try and resolve it. -
@KI108 Could you send me your hostname in the chat, then I will go see what we get in the server logs
-
@Tom
Yes there is authToken in there. I had removed it for posting to the website. But in configuration it just listsLast Agent IP Address
I removed it hereLast CheckIn
a minute agoLast Inspection
2 days agoNext CheckIn
in an hourNext Inspection
in a dayHost name
I removed it hereDays of week to run inspections
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Hour of day to run inspections
: 15:45 --> I have changed it multiple times and tried
Inspections will run at this time each selected day.I have changed the Hour of day to run the inspections multiple times to the nearest increment , Installed secteersetup.exe multiple times etc. . but still the same.
I don't see anything in Configurations to setup.Per one of the notes i had run -- immediate command and it said it sent it to vulndetect yesterday. But still nothing happens.
Thanks for the any help. -
Don't you see the "authToken" in the log file?
[2018-12-20 21:25:41.529+0000] Current configuration: version:: 0.10.11.0 authToken : aef31e67-721a-4d04-bcca-xxxxxxxxxxxx server : agent.vulndetect.com
If you don't, then you agent isn't registered properly.
In Configuration you should see a "review" agent or similar.
If you don't, then you have to uninstall and install again.